Tuesday, May 8, 2018

Flaking of etched glass

When I was doing a slow shallow etch of the waxwing bird on a cylindrical glass, I was having lots of flaking. I asked Boss Laser Tech Support what to do to improve the process and they recommended the following. 

"We have seen a lot of people have success by placing masking tape over the glass on the area that they are wanting to engrave over. This typically helps them a lot with the flaking on the glass. Also the air flow seems to be too high for that material it would probably be better to be around 20PSI.
Lastly, some lasers have a hard time firing at 14% power or below, I definitely recommend trying to up the power to at least 15 each and every job so we can ensure the laser is consistently firing for you."

I'm not sure I agree that this will help:

1. The masking tape will be hit many times in a small area and may cause lots of debris issues near the laser head.
2.We prefer pressures more like 60  psi for a reason, again, to get the debris out of there.
3. We have good experience with dependable firing at as low as 10%.

 I will consult with Seth to see if any of the suggestions from Boss Laser make sense.





Sunday, May 6, 2018

Summary of training and meeting notes with 
Boss Laser in Sanford, Florida on April 24, 2018


Kevin Lucas and Ken Trenholm were my hosts. I spent most of my time with Ken, who is the Senior Lead Technician at Boss with 27 years of laser experience.

1.  We should look at exhaust boxes

 https://www.bosslaser.com/expand-filtrabox-fume-extractor.html  

(see photo) Even though they are high cost and  high maintenance they include filtration, are relatively easy to move (small cabinet sized) on wheels and they'll be very quieter compared to our current exhaust fan.

2. Another way to reduce the noise of the work area is have compressors that are stored outside.  A brand mentioned was Ingersoll Rand.  You should put a roof or some type of cover over the top of the compressor  outdoors to help keep it robust from inclement weather and to keep the sun off of it.

https://www.aircompressorsdirect.com/tools/ingersoll-rand-air-compressors.html?utm_source=bing&utm_medium=cpc&utm_term=ingersoll%20rand&utm_campaign=brand+-+ingersoll+rand&msclkid=368887d5025e11e18d70dd3a5fbda7bf&utm_content=Ingersoll%20Rand

3.  Each laser with their own filter box would be especially useful for absorbing fumes from acrylic, leather and wood or when working in high power mode and generating a lot of smoke.

4.  Ken also said the only reason we should really be using the 4 inch laser for cutting is for doing foam, otherwise the 2 inch focal length is fine for all cutting and engraving. Either the lasers can be converted into a different focal length; we are not bound to the way they were installed.  We probably just wanted it that way when we first received them, as we figured we should have one of each type, but we don't have to stay with it that way.  In order to convert between two different focal length we need to find the official Boss Laser toolboxes (see photo).  They are black and red and they're going to have accessories that we need not only for conversion but for service going forward.  If we need remote technical support on hardware, they will also want to be asking for components in that support box with the Boss Laser technician on the line.

5.  In regards to using the rotary tool, there is an additional Y axis controller port on the right back side of the laser.  This will be easier to access and is better amenable to lighting for connecting and disconnecting the rotary roller tool than the rear Y-axis port. People with shorter arms or are uneasy reaching around the gantry system may find the side port to be preferable. It is your choice.

6.  The direction that you put in the bed support blades is really of no operational consequence.  In fact, you can run without any of the blades in there at all because if our compressor and exhaust system are working properly; you'll get good air flow with or without them.  The blades are mainly there to support your material and  media.  The reason why there are so many of them is because Boss Laser understands that there is a variety of shapes and sizes for people's Materials/Media/Substrates; this allows you to customize the support and drop down openings on a job by job basis.

7.  Because we can move all the bars if we want to, this allows us to use the 4 inch focal length laser for the rotary tool.  That's because the rotary roller tool has been designed in conjunction with the bed to be supported by the bladeless bottom of the bed in a flat manner.  In fact, there should have been an option for us upon purchase of the laser to have two low support bars put in to the bottom of the bed (see photo) expressly for this purpose of holding a rotary roller tool with all the blades removed so that the length of the cone of the 4 inch focal length head does not preclude us from using such tool.  I have taken a picture of what these bars look like. If you don't want to remove and replace bars, you may be able to get away with simply inverting the L-shaped bracket holding the wheels to be upside down to make more vertical space for the nose cone.

8.  When working with wine glasses on the rotary roller tool, the two main problems that we've experienced are (a) that flat base of the glass falls off the support wheels and (b) designs are large in the vertical direction not been fully etched as the laser goes out of focus after large curvatures at the bottom of the cup.  A suggestion for keeping the glass from falling off the wheels is to spread the two rubber band of rings just a little bit and wedge that in that part of the base in between they'll rings so that it doesn't slip off.  With regards to being out of auto-focus, instead of auto-focusing on the highest point of the curvature of the cup, choose a point that would be in the midway section of your design. Yes, this is a compromise of some precision, but we still get the whole design down and depending on the curvature, it may still look very nice.

9.  We want to make sure that we're always doing auto-focus so that the tip of the head is pointing down nearly perpendicular to the surface of the substrate.  We want to avoid having to make contact with the substrate at an angle with the cone because that can torque or bang or take out of alignment the optics and mirrors on the laser head.  This is something one also keeps in mind when regarding the wine glasses; actually do your auto-focus at the crest or highest point of the curvature of the cup, and then use the X direction control to purposely move it a little bit off the auto-focus towards the bottom of the design.

10. As regards to the computer communicating directly with the laser, a Boss Laser thumb drive was given to us when we purchased the machines; it should have all the drivers we need for the USB Port.  I did inform Ken that we did find the third party drivers with an Internet search, but in the absence of that, one can install from the thumb drive to make sure we did we have a base system that is complete.

11.  Lubrication: white lithium grease squirted anywhere you can see metal on the rail of the gantry, and also a few spots on the belt, help to keep everything running smoothly.  It's also fine to squirt some of the white lithium grease on the tooth side of the belt.  After doing so make sure you traverse in the X and Y  directions using the on-board controls to make sure the grease is evenly distributed.

12.  Our original idea of retrofitting permanently the 4 inch laser to become a metal cutting laser with an oxygen source is not practically feasible according to the Boss Laser technical in-house team.  I've taken some pictures to show the specialized parts and blades that are used in their HP line of machines which are specifically engineered for metal cutting and metal cutting only.  The claim from Boss is that the optics and mirrors, as well as the head size and shape, while in principle could be made to work with an oxygen source at the right focus distance for cutting metal,  that the quality of the work will be degraded and that we will have frequent breakdowns and be spending lots of money on replacement optics and accessories.  Additionally if we do buy an HP machine Ken essentially insisted that we bring in Mr. Mike Stone from Boss lasers for in house training as there are enough significant differences between operating a metal cutting machine vs. our current lasers that we would need proper instruction to get started.

13.  We should use double layers of tape when testing the beam spots on the mirrors for doing a beam alignment. After every adjustment, take the gantry all the way forward, test a pulse, and then all the way backwards, and test a pulse. After alignment, use the alcohol treated towel wipes to remove tape residue. It is best to use your pinky finger and make sure the fingernail is trim. Too much force can put the beam back out of alignment, and a finger nail can scratch a mirror.

14. Feel the laser head and nose cone to make sure it is cool to the touch. If the beam is out of alignment, the head and cone will be at least very warm.

15. Use cast acrylic rectangular blocks, elevated on a roll of tape, to pulse the laser after alignment to help make sure that the beam is straight down. I brought a few back with me from Boss and will give one to Seth. Beam alignment is even more critical on the HP class of lasers that do metal cutting, as the opening in the nose cone is even smaller.

16. Never alter the autofocus ring on the nose cone. If it is accidently adjusted, you will have to manually check the focus distance by changing the Z position incrementally, pulsing the laser, and checking for beam quality.

17. Ken claims that for an ordinary day of usage, the lens should be cleaned twice.

18. The honeycomb support beds can be cleaned by soaking them in hot water with Dawn dish washing soap.

19. The lasers are cw (continuous wave) lasers. As such, even though the RDWorks allows you to set a laser frequency in the layer parameters advanced settings dialog, it in fact has no effect. The default value of 20 kHz is set by Boss Laser simply as a placeholder value; no matter what number we type in there, the net result is the laser runs cw all the same. The field is there to populate in the dialog box because Boss outsources the development of RDWorks to a third party that reuses software components for different laser manufacturers, some of which do actually have lasers with rep rates.





Sunday, April 15, 2018

Concentric Circles: Reasonable combinations of speed and laser repetition rate as a function of circle diameter

I ran a test for 16 concentric circles cut by the 4 inch focal length laser at 30%. The objective was to find how the curvature would dictate the best set of laser rep rates in kHz and laser head sweep speeds. By "best" I mean achieving the smoothest edge surface for a easy pen trace while stenciling to avoid skips and unevenness in the trace.

Speeds varied from 10 mm/sec for the smaller diameters to 30 mm/sec for the largest diameters.

Laser rep rates varied from 10 kHz to 140 kHz; the larger the diameter the higher the rep rate.

Diameters varied from 0.5 inches to 8 inches.

I centered the 10 by 12 inch sheet right in the middle of the laser chamber bed for optimal and even airflow to remove plume debris during operation.
The reasoning here is that the tight curves of smaller circle need a slower head speed to give the 30% power a chance to cut through and lower rep rate as the circumference is small and high rep rate laser firings would just ablate on top of each other and create a sloppier edge. As the diameter increases, the circumference also goes up and you can run a faster head to avoid being wall clock time delayed but a higher rep rate to be sure you cut through and cover all of the circumference.

This time I also affixed painter's tape to the back side of the extruded plexiglass sheet to minimize or eliminate the occurrence of burn/char marks and surface and edge chipping. No burn/char marks were found on any of the 16 cuts and less than 5 chips over all 16 circles of a small variety were observed. They were almost really like a micro-cracks that will not interfere with pen tracing.

Here is video of the laser cutting a few of the circles.

Click to see a tabulation of the results. By "better" I mean the edges had a glossier finish while "acceptable" has cloudy finish.




 



Saturday, April 14, 2018

Practical Usage Notes about the Boss Lasers

1. Consider 1/8th inch Birch for prototyping your designs; a 5 foot square block is about $14.

2. The kHz repetition rate range of the lasers are 4 to 150. Use the smaller rep rates for smooth edges and the high rep rates for cutting.

3. Output Direct setting is the only time that the min and max values being different matters. Otherwise the laser only cares about the maximum value for  power objectives

4. Frequent and heavy duty users can consider buying their own lens kit.

5. Purposely de-focusing the laser by moving it by one or 2 mm away from the autofocus can create wider/bolder lines for artistic expression.

6. Orient the wood grain perpendicular to the X-Swing direction for best results.

7. High density polyethylene (HDPE) tends to melt.

8. After engraving wood with the laser, you can clear coat it for preservation but do not use any liquid wood stains.

9. After working with plastic substrates, keep the laser lid closed after job completion to allow the fumes to be fully evacuated.

10. The 4 inch focal length laser is generally better at making clean cut throughs, especially for thicker materials. The schematic below shows a somewhat exaggerated view for how the 2 inch focal length is somewhat trickier to autofocus for cutting purposes.








Wednesday, March 14, 2018

coated aluminum and wood etching

Today we etched a logo into the painted surface of a thermos mug and a wooden sign.

Try to use the lowest power possible and only move up in power if the paint on your aluminum surface is very thick. We want to avoid reflecting the laser beam back in the direction it came from off the metal surface, as this could potentially damage the optics and laser tube by energy redirection.

A good choice for wood is 1/8 inch Birch which can be purchased for about $14 for a 5 by 5 foot square.

The rep rate range for our lasers is between 4 and 150 kHz. Use lower rep rates for smoother edge along cut lines and depths, and higher rep rates to cut all the way through thicker (> 1/4 '') materials.

A trick Seth taught us is to purposely defocus the laser after and autofocus by backing the the Z direction by 1-2 mm (move the bed downwards). This can save you time by making your cut lines purposely not go all the way through, while at the same time broadening ("bolding") the line. This will have roughly the same effect as a medium single pass scan, but much faster.


Tuesday, March 13, 2018

Rotary Roller Examples

Boss Laser recommends that on some occasions when shallow etching glass, whether on flat or rounded materials, you will be better served by first attaching wet non-shiny newsprint to the glass. The challenge is that the laser chamber is dry and with air flowing briskly during operation, the engraving run must be paused periodically to take a brush to re-wet the newsprint.

Here is a video showing Seth's engraving and the use of wet newsprint


I have attempted to engrave a very detailed 5 inch bird onto a cylindrical 7 inch tall glass. I am now also engraving the main parameters of power %, scan gap interval in mm, and laser pulse frequency in kHz. This way when I engrave up to four birds on one glass, after several cycles of hand and/or machine washing, I'll know which set of parameters holds up the best.

Right now,  I am experiencing inconsistent results, even in back to back runs on the same laser with no change of tool position. I speculate that air flow consistency and possible soiling of the optical head on the relatively long 25 minute runs may cause deterioration of engraving performance. I tried to improve the former by standing attendant to the control knob on the compressor to even out the air flow manually as needed, but some flaking issues persist. I may also try wet newsprint. You can compare the two back-to-back engravings below.


First run ... relatively clean



Second run that same day, ... aborted due to excessive flaking.




Rotary Roller Tool

It is important that the laser is first completely off and powered down BEFORE disconnecting the Y-axis controller cable and replacing it with the cable to the rotary roller accessory. Failing to do so will result in the X/Y/Z limits to be incorrectly set when you have returned to linear mode after removing the Rotary Roller tool.